Sprøjtestøbemaskine

KraussMaffei Technologies GmbH KM 80 / 380 CX G06

Injection molding machines direct from the manufacturer!

As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here:

The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application.

TECHNICAL DATA:
KM 80 / 380 CX G06 (order 38655610)

CONTROL
 MC 6 with 21.5" TFT color screen with multi-touch functions

CLAMPING UNIT
 Clamping force kN 800
 Mold opening force, max kN 55
 Clear width (h x v) mm 470 x 420
 Clamping platen (h x v) mm 670 x 670
 Tool installation height min. - max. mm 400 (increased by 150 mm)
 Opening width mm 900 (increased by 150 mm)
 Mold opening stroke max. mm 500
 Hydraulic ejector drive
 Ejector stroke mm 150
 Ejector force forwards/backwards kN 22.6 / 9.8
 Ejector speed forwards/backwards mm/s 760 / 800
 Max. Mold weight kg 1000

SPRING UNIT
 Screw diameter / type mm 30 / standard (customization possible)
 Effective Ls/D ratio 26.7
 Injection pressure bar 2500
 Stroke volume cm³ 113
 Shot weight at max. stroke for PS g 103
 Injection speed mm/s 100
 Injection flow rate cm³/s 71
 Screw drive/speed 1/min 295
 Plasticizing flow (standard) g/s 12.3
 Nozzle contact force kN 50

ELECTRICAL PARAMETERS
Connected load kW 15.0
Dsdsud N Hdspfx Aghjul
 Installed heating capacity kW 10.9
 Power supply V / Hz 380 / 50 3 phases with neutral conductor

WEIGHT AND DIMENSIONS
 Net weight with switch cabinet t 3.55
 Length x width x height m 3.96 x 1.48 x 2.02

ADDITIONAL EQUIPMENT
 Low-wear plasticizing
 BluePower fully insulated plasticizing cylinder
 Open nozzle
 1 additional temperature control point for nozzle heating
 Air valve 1 - compartment (BWAP)
 Pneum. Control hot runner valve gate 1 - compartment
 Hydraulic core pull 1 - compartment (BWAP)
 Euromap interface handling E18, E63
 Euromap interface (central computer) E67, E77
 Adaptive Process Control (APC)
 Injection stamping circuit
 Graphic analysis package

The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request.

We look forward to your inquiry.

Annoncen blev oversat automatisk, og der kan forekomme nogle oversættelsesfejl.