Vertikalt bearbejdningscenter

Pinnacle SV 116

The machine bed and stand are made of cast iron.
torsionally rigid.
The machine type SV-116 has flat guides in all axes.
flat guides
All flat guides are hardened and ground
The main spindle and all axes are driven by HEIDENHAIN
AC motors,
High-precision preloaded ball screws in all axes,
as well as a fully protected cabin with a three-sided enclosure
and a central lubrication system with freely selectable
lubrication cycles
Standard equipment:
* Control: HEIDENHAIN iTNC 530 smarT.NC
* Full enclosure with 2 sliding doors on the front and
window (side) according to CE standard.
* 2 fluorescent tubes for optimum work area lighting.
* Mechanical weight compensation of the boom.
* 200 liter coolant system.
* Chip flushing system in the entire work area.
* Ammeter.
* Electronic handwheel HR-410 with 2.5 m spiral cable.
* Blow-out device for the spindle.
* Chip conveyor hinged belt included
Chip trolley.
* AC motor and drives from HEIDENHAIN DIGITAL.
* Complete preparation of 4th axis incl. cabling and plugs.
plugs.
* Coolant flushing gun (workpiece flushing).
* Compressed air gun on the spiral hose.
* Ethernet card for fast data transfer and possibility
possibility of network integration.
* Controlled compressed air nozzle on the spindle head
* Oil cooling unit to keep the spindle bearing temperature constant.
temperature.
* Internal coolant supply through the spindle (IKZ) with a pressure of
a pressure of 20 bar.
* Mobile additional tank with paper belt filter and base pumps
Capacity 600 liters. Easy to position on rollers
positionable.
* Full encapsulation of the machine, also above the automatic tool changer.
tool changer.
* Speed 10000 rpm.
* Main spindle motor from HEIDENHAIN / INDRAMAT
Type: QAN 200 U 10Kw ( 16 Kw ) drive power.
Power at ED S1 (100%) 10 Kw
Power at ED S6 ( 40% ) 16 Kw
Technical data:
Table dimensions (mm): 1300 x 600
Max. Workpiece weight: 850 kg *
Distance from spindle nose to table surface: 100-710 mm
Rxlggvlix7
Distance from spindle center to Z-axis guide: 645 mm
Spindle holders: SK-40DIN 69871
Inner diameter of the front spindle bearing: 70 mm
Ball screws in all axes: Diameter 40x8 mm
Ball screws preloaded without play
Tool clamping force: 950 kg
Travels:
X: 1145 mm
Y: 615 mm
Z: 615 mm
Number of grooves: 5
Groove spacing: 100 mm
Groove quality: 18mm
Center groove: 18H12
Spindle motor: Heidenhain QAN 200L DIGITAL
Axis drives: Heidenhain QSY 155B DIGITAL
Speed range: 60-10000rpm
Coolant pump power: 400 watts
Power of the central lubrication pump: 75 watts
Rapid traverse X- and Y-axis: 25 m/min
Rapid traverse Z-axis: 24 m/min
Positioning accuracy and
Repeat accuracy: +/- 0.005 mm
Tool changer:
Tool changer type: Double gripper
Number of tools: 24
Max. Tool diameter with
full occupancy: 75/125
Max. Tool weight: 7 kg
Max. Tool length: 250 mm
Tool change time: 1.8 sec.
Chip-to-chip time: 5 sec.
Tool holder taper: SK40 DIN 69871
General connection data and dimensions:
Air connection: 6 bar
Total connected load: 25 KVA
Rated voltage: 380V 50/60 Hz
Machine weight min.: 7500 kg
Machine dimensions (LxWxH): 3100x2200x2662
Transport height incl. rollers: 2450 mm
Further options possible at any time:

QAN 200UH. Direct drive
12000 rpm,
Power at 100 % duty cycle = 10 Kw
Power at 40 % duty cycle = 15 Kw

RMP60/RMI radio touch probe for machine tools
which is equipped with FHSS radio transmission.
(Frequency Hopping Spread Spectrum)

Annoncen blev oversat automatisk, og der kan forekomme nogle oversættelsesfejl.