10°C til +250°C / 749 literMemmert Universal - Wärmeschrank
UFP 800
10°C til +250°C / 749 liter
Memmert Universal - Wärmeschrank
UFP 800
Betingelse
Brugt
Beliggenhed
Borken 

Vis billeder
Vis kort
Oplysninger om maskinen
- Maskinbeskrivelse:
- 10°C til +250°C / 749 liter
- Fabrikant:
- Memmert Universal - Wärmeschrank
- Model:
- UFP 800
- Betingelse:
- meget god (brugt)
Pris og placering
- Beliggenhed:
- Einsteinstraße 8a, 46325 Borken, Deutschland

Ring
Detaljer om tilbuddet
- Noterings-id:
- A213-10222
- Referencenr.:
- 25067
- Sidst opdateret:
- d. 24.02.2026
Beskrivelse
Memmert
Model: UFP 800
Basic equipment features:
Electronic fuzzy-supported PID process controller with continuous power adjustment and a time-saving self-diagnosis system for quick fault detection (see section “Error Messages”)
Language selection
Alphanumeric text display
Internal protocol memory with 1024 kB for storing actual temperature, set temperature, air turbine, air flap, and fault conditions with time stamp
Device control and recording of actual values on MEMoryCard XL
Program sequence control for up to 40 ramp segments
Adjustable air turbine for forced-air ovens (adjustable in 10% increments)
Servo-motor driven air flap (adjustable in 10% increments) for recirculated air or fresh air operation
Nwjdpfxeymm Ero Abpsc
Integrated weekly timer with group function (e.g. all workdays)
Retractable push/turn control knob for easy operation
Visual alarm indicator
Built-in buzzer for alarm in case of limit value exceedance, as an acoustic signal at program end, and for operator acknowledgement (key click)
Digital monitoring controller for over-temperature, under-temperature, and automatic setpoint tracking (ASF)
Mechanical temperature limiter (TB Safety class 1)
Monitoring relay for heater shut-off in the event of a fault
Two separate PT100 temperature sensors, DIN Class A, 4-wire design for regulation and monitoring
Convenient integrated 3-point temperature calibration
Temperature-dependent switching chamber and door ventilation
Parallel printer interface (PCL3 compatible)
Serial RS-232C interface for computer-controlled temperature programs and for reading out the internal protocol memory
Technical data:
Interior: made of stainless steel, deep-drawn with ribbing for high stability and easy cleaning.
Housing (outer body): Textured stainless steel, rear panel made from zinc-plated sheet steel.
UFP 800 is mobile and lockable on castors.
External dimensions: Width 1190 mm; Depth 750 mm; Height 1620 mm
Internal dimensions: Width 1040 mm; Depth 600 mm; Height 1200 mm
Volume: approx. 749 liters
Weight: approx. 170 kg
Power supply: 3N~ 400 V 50/60 Hz
Power consumption: approx. 4800 W, 7A
Condition: used
Scope of delivery: (see picture)
(Technical data may be subject to change or error—information without obligation!)
Further questions can gladly be answered by phone.
Annoncen blev oversat automatisk, og der kan forekomme nogle oversættelsesfejl.
Model: UFP 800
Basic equipment features:
Electronic fuzzy-supported PID process controller with continuous power adjustment and a time-saving self-diagnosis system for quick fault detection (see section “Error Messages”)
Language selection
Alphanumeric text display
Internal protocol memory with 1024 kB for storing actual temperature, set temperature, air turbine, air flap, and fault conditions with time stamp
Device control and recording of actual values on MEMoryCard XL
Program sequence control for up to 40 ramp segments
Adjustable air turbine for forced-air ovens (adjustable in 10% increments)
Servo-motor driven air flap (adjustable in 10% increments) for recirculated air or fresh air operation
Nwjdpfxeymm Ero Abpsc
Integrated weekly timer with group function (e.g. all workdays)
Retractable push/turn control knob for easy operation
Visual alarm indicator
Built-in buzzer for alarm in case of limit value exceedance, as an acoustic signal at program end, and for operator acknowledgement (key click)
Digital monitoring controller for over-temperature, under-temperature, and automatic setpoint tracking (ASF)
Mechanical temperature limiter (TB Safety class 1)
Monitoring relay for heater shut-off in the event of a fault
Two separate PT100 temperature sensors, DIN Class A, 4-wire design for regulation and monitoring
Convenient integrated 3-point temperature calibration
Temperature-dependent switching chamber and door ventilation
Parallel printer interface (PCL3 compatible)
Serial RS-232C interface for computer-controlled temperature programs and for reading out the internal protocol memory
Technical data:
Interior: made of stainless steel, deep-drawn with ribbing for high stability and easy cleaning.
Housing (outer body): Textured stainless steel, rear panel made from zinc-plated sheet steel.
UFP 800 is mobile and lockable on castors.
External dimensions: Width 1190 mm; Depth 750 mm; Height 1620 mm
Internal dimensions: Width 1040 mm; Depth 600 mm; Height 1200 mm
Volume: approx. 749 liters
Weight: approx. 170 kg
Power supply: 3N~ 400 V 50/60 Hz
Power consumption: approx. 4800 W, 7A
Condition: used
Scope of delivery: (see picture)
(Technical data may be subject to change or error—information without obligation!)
Further questions can gladly be answered by phone.
Annoncen blev oversat automatisk, og der kan forekomme nogle oversættelsesfejl.
Udbyder
Bemærk: Registrer dig gratis eller log ind, for at få adgang til alle oplysninger.
Registreret siden: 2012
Send anmodning
Telefon & Fax
+49 2861 ... annoncer
Du kan også være interesseret i disse annoncer.
Lille annonce
Borken
520 km
10°C til +250°C / 749 liter
Memmert Universal - WärmeschrankUFP 800
Memmert Universal - WärmeschrankUFP 800
Din annonce er blevet slettet
Der opstod en fejl























