Spotting presse

HIDRALMAC Tuschierpresse 40 Tonnen

We offer an immediately available Hydraulic spotting press with 40 tons pressure. Due to a change of warehouse location, this press is offered at a very competitive price.

Pressure 40 t
Table length 1000 mm
table width 700 mm
Machine weight approx. 9 t
space requirement approx. 4000 x 4400 x 1800 mm
stroke length 1050 mm
installation height 1200 mm
table rotatable 180 degrees
table load max. 5 t
forward speed 100 mm/sec
return speed 100 mm/sec
working speed adjustable from 0 to 10 mm/sec.
Main cylinder 1 piece
table extendable for 1050 mm
table tiltable 50 degrees
Dcjdpfehtm E Njx Aaaen
upper tool tiltable 180 degrees
Traversing speed of the table 25 mm/sec
Pressure, travel and speed adjustable via monitor-
control adjustable

robust machine body with solid welded construction, manufactured according to DIN 8651 low maintenance and reliable due to robust technology
maintenance balcony with marine ladder
entire range of motion secured by Sick light barriers
Table moves out of the machine to the front and straightens up by 45 degrees on request.
Control cabinet to the left of the machine
Monitor control with 200 memory locations
REMOTE function for remote maintenance
Operating manual, technical documents, documentation in German language
CE certificate
monitor SIEMENS 9"
Motors from WEG
Hydraulics from Bosch Rexroth
Interior lighting
Operator panel on swivel arm
Two-hand operation on movable stand
USB interface for data transfer
Siemens control system
Light sensors Sick 1250 mm
ram plate can be folded down hydraulically, moves up to approx. 175 degrees


Columns and cylinders are made of SAE 1045 tool steel (identical to German standard C 45) and are induction hardened and chrome plated on the outside.
The linear measuring rod informs the control system of the position of the ram in each case. The travel distance, the upper stop point and the changeover point at which the press is to switch from idle to working speed, as well as the end position to be approached, can be entered easily and quickly via the monitor control.
The working speed can be set in 1 mm/sec increments from 0 to 10 sec and in 10 mm increments from 10 to 155 mm.
The control monitors the secured areas, all hydraulics and the pump.
The control system is housed in a separate control cabinet.
The actual press operation is carried out via a control panel mounted on a swivel arm, which reduces the distances involved.