Centrumdrejebænk

Weiler Praktikant 140

Stand: meget god (brugt), Produktionsår: 1988, Funktionalitet: fuldt funktionsdygtig, Weiler Praktikant 140 B Lead and Feed Screw Lathe with toolmaker precision, equipped with brand-new 3-axis digital readout from K&C! Technical Data: >> Year of manufacture: 1988, Machine No. 89-160-1292 >> Centre height: 140 mm >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2,500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.02 to 0.63 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch threads possible >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Engagable spindle brake >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and Equipment: Dcsdpfx Aajymdy Tsmsd >> 3-axis digital readout from K&C (new), 12 months manufacturer warranty with operating manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zero setting, counting direction switch >> Collet chuck, collets from 1 to 29 mm in 0.5 mm increments >> 160 mm three-jaw chuck with one set of jaws >> Multifix size A quick-change toolpost with 2 holders >> Bed stop >> Rear splash guard >> Machine feet >> Electronic spindle protection >> Operating manual Safety features: Electronic spindle protection, lead and feed screw covers, 2 emergency stop switches, spindle brake, electronic gear cover door lock About the machine: Offered here is a Weiler Praktikant 140 B lead and feed screw lathe in very good condition. This is a very well-maintained lathe from a training workshop. The slides move smoothly and evenly. The Weiler runs quietly even at high speeds. This newer generation of Weiler lathes is very user-friendly and allows for ground-quality surfaces. Take this opportunity to inspect the machine under power on-site and see the condition for yourself.

Stand: meget god (brugt), Produktionsår: 1989, Funktionalitet: fuldt funktionsdygtig, Weiler Praktikant 140 B lead and feed screw lathe with toolroom precision, equipped with NEW K&C 3-axis digital readout! Dcodpfx Aaeymdymomod Technical Data: - Year of manufacture: 1989, Machine No. 89-140-1471 - Centre height: 140 mm - Centre distance: 650 mm - Spindle speeds: 24 to 2,500 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock: MK 3 - Feeds: 0.02 to 0.63 mm/rev - Thread cutting: Metric, Whitworth (inch), Module and Diametral Pitch threads possible - Metric thread pitches: 0.25 to 8 mm - Weight approx. 680 kg - Switchable spindle brake - Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: - New 3-axis digital readout from K&C with 12 months manufacturer warranty and user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming (200 memory locations), taper calculation, radius/diameter, quick zeroing, counting direction reversal - NEW collet chuck, 3–25 mm in 1 mm increments, NEW collets - 160 mm 3-jaw chuck with 1 set of jaws - Multifix size A with 2 tool holders - Faceplate - Bed stop - Rear splash guard - Machine feet - Electronic spindle protection - Operating manual Safety Features: Electronic spindle guard, leadscrew and feed screw cover, 2 emergency stops, spindle brake, electronic change gear door lock About the Machine: Offered here is a Weiler Praktikant 140 B lead and feed screw lathe in very good condition. This well-maintained lathe comes from a training workshop. All slides run smoothly and evenly. Even at high spindle speeds the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows for ground-like surface finishes. Take the opportunity to view the machine under power at our facility and see its condition for yourself.

Stand: meget god (brugt), Produktionsår: 1988, Funktionalitet: fuldt funktionsdygtig, Weiler Praktikant 140 B førings- og trækspindel drejebænk i værktøjsbygger-præcision med 3-akset digitalt display fra K&C – NYT! Tekniske data: >> Byggeår: 1988 Maskinnr.: 88-140-1386 >> Spidshøjde: 140 mm >> Spidsbredde: 650 mm >> Spindelhastigheder: fra 24 til 2500 o/min >> Spindelboring: 40 mm >> Kortkegle-spindelhoved DIN 55027 størrelse 5 med bajonetlukning >> Pinoldok MK 3 >> Fremføringer fra 0,02 til 0,63 mm/omdr. >> Mulige gevind: Metrisk, tomme, modul og diametral pitch >> Metriske gevindstigninger fra 0,25 til 8 mm >> Vægt: ca. 680 kg >> Spindelbremse kan tilkobles >> Længde: 1,6 m, højde: 1,25 m, dybde: 0,7 m Tilbehør og udstyr: >> 3-akset digitalt display fra K&C, nyt, 12 måneders fabriksgaranti, med betjeningsvejledning Funktioner: skift mellem mm/tommer, koordinatvalg ABS/INC, halvering af visningsværdi, referencemærke, værktøjsprogrammering til 200 stk., konusberegning, radius/diameter, hurtig-nulstilling, skift af tælleretning >> Nyt spændetangudstyr, spændetænger fra 3 til 25 mm i 1 mm intervaller, nye >> 3-bakke uafhængigt skruestik 160 mm med 1 sæt bakker >> Multifix størrelse A med 2 stk. stålholdere >> Sengeanslag >> Bagvæg >> Maskinfødder >> Elektronisk spindelbeskyttelse >> Driftsvejledning For sikkerhed: Elektronisk spindelbeskyttelse, afdækning af førings- og trækspindel, 2 nødstop, spindelbremse, elektronisk dørlås til tandhjulskift Dcodpfjymdu Dex Aamed Om maskinen: Her tilbydes en Weiler Praktikant 140 B førings- og trækspindel drejebænk i meget god stand. Den meget flotte drejebænk kommer fra et uddannelsesværksted. Slæderne bevæger sig let og jævnt. Også ved høje omdrejningstal kører Weiler’en stille og roligt. Denne nyere generation af Weiler drejebænke er meget brugervenlig og muliggør overflader i slibekvalitet. Du har mulighed for at se maskinen tilsluttet på stedet og overbevise dig om dens tilstand.